Automatic Driving Lessons In North Dublin- Parallel Parking
What is parallel parking?
Parallel parking is a means of parking your vehicle parallel to the road, usually in a line of other vehicles.
Typically, you’ll drive your vehicle alongside the one in front of the available space, before reversing it in.
It’s generally considered one of the trickier skills for new drivers to learn, but becomes second nature with practice and can be essential when hunting for a parking space in a busy street after you’ve passed your test.
When do I need to parallel park?
Parallel parking allows you to park in a smaller space than would be possible if you were driving forward into it.
Driving forward into a roadside space is usually only do-able if two spaces in a row are unoccupied.
By reversing in, a driver can take advantage of a single empty space, not too much longer than the car.
Most residential roads accommodate roadside parking as standard, and in town and city centres where space is a premium, parallel parking might be the only option to get a space.
These instructions assume you’re parking on the left-hand side of the road (i.e. with the flow of traffic).
If parking on the right-hand side, the directions are reversed.
This is a general guide and while the principles will remain the same, your driving instructor might have their own preferred methods and reference points for teaching. First things first:
- Make sure the space you are aiming to park in is big enough.
- Indicate, then pull up alongside the space and check there’s a minimum of two feet either end.
- Edge forward slowly, until the centre of your passenger side front window is roughly lined up with the front of the car in front of your space – if it’s facing the same way as you. (If it’s parked facing the opposite way, line up your passenger window with its back bumper).
- Check your mirrors, and turn to check your blind spot.
- Once you are happy it is safe, slowly begin reversing, looking behind you over your left shoulder and through the rear windscreen.
- Slowly reversing now, roughly line up your back tyres with the back bumper of the the car in front of your space.
- Now apply your handbrake and check your blindspot again, as when you turn to reverse into the space, the front of your car will swing out into the road slightly – so you will need to ensure nothing is coming.
- If it is safe to do so, turn the steering wheel one complete turn to the left. Keep things nice and steady, concentrating on achieving a full turn.
- Start slowly reversing, using the nearside mirror to check the position of the kerb, and the rear view mirror to see the vehicle behind you.
- Once you can see the kerb in your nearside mirror and you’re clear of the car in front, it’s time to stop the car and starting turning the steering wheel to the right.
- This time, use full lock, bringing the front of your car in towards the kerb. The trick here is fast steering but slow reversing – so quick hands, but steady feet.
- Straighten up your position on the road, by again turning the steering wheel to the left so the car is reversing back straight.
Leave a Reply